Flash Exposure Bracketing - Nikon N70 AF Instruction Manual

3
4
First shot is taken .
Remove your finger from SET/'::> button to complete setting .
Compose picture, lightly press shutter release button,
confirm focus and exposure, and confirm the ready-light
comes on.
Inside the viewfinder,
il~
and the electronic analog display
showing direction of compensation blink.
5
Regardless of the film advance mode setting, fully depress
shutter release button three times to take the three shots .
• If film reaches end of roll during shooting, rewind film , load a
new roll of film, fully depress shutter release button to
advance film to frame 1 , then fully depress shutter release
button again to resume operation .
• Turning the camera's power off, storing the built-in flash to
down position or turning off the attached Speedlight cancels
Flash Exposure Bracketing.
Second shot is taken . Third shot is taken .
6
After three shots are taken, Flash Exposure Bracketing is
automatically canceled. If you want to take one more set
of exposure bracketing shooting with the same degree of
compensation, press FUNCTION button then SET/ ' : :> button.
• If you set self-timer immediatelly after setting Flash Exposure
Bracketing, you can perform self-timer shooting without
bracketing. After self-timer shooting, fully depress shutter
release button to perform Flash Exposure Bracketing.
95