Nikon N70 AF Instruction Manual page 20

+
3
Hold the OUT button and rotate command dial until :J appears
in the QR (Quick Recall) window on LCD panel. Remove your
finger from the
OUT
button. The camera's settings are automatically
reset to factory initial settings (as shown below) for basIc shooting:
Film advance mode: Single
frame (m)
Focus area: Wide (,,)
Focus mode Single Servo AF (A F-S)
Metering system: Matrix (fWJ)
Exposure mode
(including Vari-Program):
Flash sync mode
Auto-Multi Program (P)
Normal (If accessory Nikon
Speedlight attached is set at
Rear-Curtain Sync, Rear-Curtain
Sync will be performed.)
Flexible Program setting Cancel
Exposure compensation function Cancel
All Mode Exposure Bracketing Cancel
Flash Exposure Bracketing Cancel
For details about QR function, see pages 70 to 71.
20
For details about each function/mode, see following
pages:
• Film advance mode
• Metering system
• Exposure mode
• Focus area
• Focus mode
• Flexible Program
• Flash sync mode
• Exposure compensation function
• All Mode Exposure Bracketing
• Flash Exposure Bracketing
p.28
pp.43-45
pp.46-60
pp.29-30
pp.31 -42
p. 51
pp.68-69
pp.78-79
pp.80-82
pp.94-95