Nikon N70 AF Instruction Manual page 93

IIDI
!HlP
60
F3.5 _ .
3
To complete setting, remove your finger from SET/08
button. Once set, Flash Output Level Compensation
remains fixed until reset. Although
11[1;l
stays on to indicate that
Flash Output Level Compensation is set, the compensation
value disappears from LCD readout when you remove your
finger from
SET/08
button. Inside the viewfinder,
11[1;l
appears.
+ ~
~p
60 F3.S
4
After shooting, be sure to reset amount of compensation
to "0" to resume normal operation.
If
you store the built-in flash in the down position or tum off the
attached Speedlight, compensation value is automatically reset
to "0".
93