Film Speed Setting - Nikon Nuvis A20 Instruction Manual

Installing batteries (See Fig. D on page 33.)
1 To open, pull up the battery chamber cover in the direction of the arrow.
2 Install two AA-size alkaline batteries, with the + and - poles oriented as shown
inside the battery chamber.
3 Push the battery chamber cover back into place until it clicks shut.
Notes
• Do not use NiCd batteries.
• Remove batteries from the camera when not in use for a long time.
• Do not break open or try to recharge batteries.
• Do not throw batteries into the fire.
• Keep batteries out of the reach of children.
• Be sure to replace the batteries with a fresh set if you notice any delays in
recharging flash.
Film speed setting
Correct film speed is automatically set when ISO 100 or ISO 200 film is loaded.
With any film faster than ISO 200, film speed is automatically set to ISO 200
regardless of the actutal ISO rating.