Nikon N70 AF Instruction Manual page 22

6 Lightly press shutter release button to start autofocus
operation and switch exposure meter on .
With a stationary subject, confirm that the in-focus indicator .
appears on the viewfinder's LCD readout. With a moving
subject, confirm that Focus Tracking indicator • • appears.
Confirm, too, that the shutter speed and aperture indications
are shown inside viewfinder. (Exposure readouts also appear in
the camera's extemal LCD paneL)
• If • appears, subject is located closer than the lens' closest
focusing distance. Move away from the subject and refocus.
• If . • blinks in the viewfinder, autofocus is not possible
(p.38).
22
Note on Single Servo AF with a stationary subject
After focusing is achieved and in-focus indicator .
appears, focus is locked as long as the shutter release
button is lightly pressed. If the distance between you
and the stationary subject changes, remove your finger
from shutter release button, then lightly press it again to
refocus.
For details about Single Servo AF, see page 32.