Selector Lever Reverse Inhibiting Function; Selection Of Manual Mode - Subaru Outback 2006 Manual

Hide thumbs Also See for Outback 2006:
Table of Contents

Advertisement

7-26
Starting and operating
km/h) and a 4th-to-3rd automatic down-
shift will not occur at speeds above 53
mph (86 km/h).
. Automatic downshifts to 4th or 3rd
may occur even when driving on a level
road depending on conditions, such as
how hard you depress the brake pedal.
& Selector lever reverse inhi-
biting function
This function prevents accidental move-
ment of the selector lever to the "R"
position while the vehicle is moving.
The function becomes operational when
the vehicle reaches a speed of approxi-
mately 6 mph (10 km/h). Once opera-
tional, it prevents the selector lever from
being moved from the "N" position to the
"R" position. When the vehicle speed
drops below 6 mph (10 km/h), the function
is canceled. The selector lever can then
be moved to the "R" and "P" positions.
When the ignition switch has been turned
to the "LOCK" position, movement of the
selector lever from the "N" position to the
"R" position is possible for a limited time
period by depressing the brake pedal and
then becomes impossible. Also, the se-
lector lever cannot be moved to the "R"
position after it has been placed in the "P"
position and then placed again in the "N"
position.
When the movement of the selector lever
from the "N" position to the "R" position
has become impossible, turn the ignition
switch back to the "ON" position then
move the selector lever to the "P" position.
Pressing the selector lever release button
also makes it possible to move the
selector lever to the "P" position at this
time.
!
S07AH02
Selector lever release button
If you inadvertently have turned the igni-
tion switch to the "OFF" position with the
selector lever in the "N" position, proceed
as follows. By referring to the
lock release"
section in this chapter,
remove the shift lock release cover. Then,
with the screwdriver inserted into the hole,
Black plate (272,1)
move the selector lever to the "P" position.
If the selector lever reverse inhibiting
function fails, have the vehicle inspected
by the nearest SUBARU dealer.
& Selection of manual mode
S07AH0201
Turbo and 3.0-liter models
"
Shift
s07ah07
北米Model "A2440BE-A" EDITED: 2006/ 12/ 6
S07AH03

Advertisement

Table of Contents
loading

This manual is also suitable for:

Legacy 2006

Table of Contents