Pre-Ride Checklist And Usage; Safety Gear - Razor deltawing Owner's Manual

PRE-RIDE CHECKLIST
Brake
Check the brake for proper function. When you squeeze the
lever, the brake should provide positive braking action.
Loose Parts
Check and secure all fasteners before every ride. Make sure
the collar clamp bolts and platforms are tight. There should not
be any unusual rattles or sounds from loose parts or broken
components. If you are not sure, call 1-866-467-2967
for assistance.
USAGE
How to Ride
Place both hands on the handlebars. Place one foot on the platform directly above the caster. Push off with the other
foot then place foot on the other platform directly above the caster. Slightly bend knees. With handlebars straight,
swing hips and legs side to side. Shifting weight on the platforms from right to left in sync with hips and legs. The side
to side motion acts to self propel the DeltaWing. No pushing required.
How to Stop
Apply hand brake.
Step off the DeltaWing to the side or rear. Do not step or jump in front of moving DeltaWing platforms.
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames are
rare, it is possible for an aggressive rider to run into a curb or wall
and wreck, bend or break a frame. Get in the habit of inspecting
yours regularly.

Safety Gear

Always wear proper protective equipment, such as an approved
safety helmet, elbow pads and kneepads. Always wear shoes (lace-
up with rubber soles) and keep shoelaces tied and out of the way of
the wheels. Never ride barefooted or in sandals.
4
Note: Do not step off of
platforms until unit has come
to a complete stop.