Pre-Ride Checklist And Usage - Razor PowerWing Owner's Manual

PRE-RIDE CHECKLIST
Loose Parts
Check and secure all fasteners before every ride. Make sure
the steering bolts and foot platforms are tight. There should
not be any unusual rattles or sounds from loose parts or
broken components. If you are not sure, call 1-866-467-2967
for assistance.
Replacement Parts
Replace worn or broken parts immediately.
Call 1-866-467-2967 for parts or visit www.razor.com.
Brake
Check the brake for proper function. When you squeeze the
brake lever, the brake should provide positive braking action.
USAGE
How to Ride
Place both hands on the handlebars. Place one foot on the platform directly above the caster. Push off with the other
foot then place foot on the other platform directly above the caster. Slightly bend knees. With handlebars straight,
swing hips and legs side to side. Shifting weight on the platforms from right to left in sync with hips and legs. The
side to side motion acts to self propel the PowerWing. No pushing required.
How to Stop
Apply hand brake by squeezing brake lever.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to run into a curb
or wall and wreck, bend or break a frame. Get in the habit of
inspecting yours regularly.
Safety Gear
Always wear proper protective equipment, such as an approved
safety helmet, elbow pads and kneepads. Always wear shoes
(lace-up with rubber soles) and keep shoelaces tied and out of
the way of the wheels. Never ride barefooted or in sandals.
5
Note: Do not step off of
platforms until unit has come to
a complete stop.