Pre-Ride Checklist And Usage; Replacement Parts; Safety Gear - Razor Pro Series Owner's Manual

PRE-RIDE CHECKLIST
Loose Parts
Check and secure all fasteners before every ride. Make sure the
collar clamp is locked properly in place before riding.

Replacement Parts

Replace worn or broken parts immediately.
Call 1-866-467-2967 for parts or visit www.razor.com.

Safety Gear

Always wear proper protective equipment, such as an approved
safety helmet, elbow pads and kneepads. Always wear shoes
(lace-up with rubber soles) and keep shoelaces tied and out of
the way of the wheels. Never ride barefooted or in sandals.
USAGE
How to Ride
Place one foot on the deck, push forward with the other foot. Steer with both hands on the handlebars. For enhanced
cornering, lean slightly into the direction of the turn. For controlled stops, apply the brake by stepping on the rear
fender/brake. Razor recommends that you practice applying the brake at various speeds and in an open area free from
obstructions before riding your Razor scooter around others.
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Be Careful!
You will see people on TV and maybe even people you know doing
tricks and stunts. These are people who have been practicing on
scooters for a very long time. Don't try something until you are
ready. Avoid steep inclines and don't ride too fast — you can lose
control and fall. Skateboard parks are not designed for scooters.
Never ride in traffi c or on the street and watch your surroundings
for pedestrians, bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.
4