Remove The Camera Bracket And Camera Cable - Lenovo 82RB Hardware Maintenance Manual

Figure 39. Remove the sensor board
Go to https://support.lenovo.com/partslookup
replacement parts:
Tape
Sensor board
Removable tape

Remove the camera bracket and camera cable

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 45
"Remove the LCD bezel" on page 47
"Remove the hinge cover" on page 47
"Remove the LCD panel" on page 48
Step 1. Remove two screws and then remove the camera bracket.
Figure 40. Remove two screws and remove the camera bracket
Screw specifications
M1.6 x L2.4
Step 2. Disconnect the camera cable from the sensor board and the camera board. Remove the camera
cable.
to look up the Lenovo part numbers of the following
Number of screws
2
.
Chapter 4 Removing a FRU or CRU
51