Remove The Sensor Board - Lenovo 82RB Hardware Maintenance Manual

Figure 37. Remove the EDP cable
Go to https://support.lenovo.com/partslookup
replacement parts:
EDP cable
Removable tape

Remove the sensor board

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 45
"Remove the LCD bezel" on page 47
"Remove the hinge cover" on page 47
"Remove the LCD panel" on page 48
Step 1. Peel off the tape.
Figure 38. Peel off the tape
Step 2. Disconnect cables connected to the sensor board and then remove the sensor board.
50
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following