Table of Contents
Advertisement
MULTIROOM
SYSTEM
The Multiroom system is a mode which allows you
to listen to the same or a different source in two
rooms other than the room in which the SR9600 is
located.
To use this function, a multiroom remote unit and
remote control signal receiver available from your
Marantz dealer are necessary.
The operations possible with the multiroom mode
are explained briefly below.
For details, refer to the instruction manual supplied
with the multiroom remote control unit and receiver.
To output to multirooms A and B, connect the
video from the MULTI OUT A/B jacks to the
monitors in multirooms A and B as shown in the
connection example on page 27. Connect the
audio from the MULTI OUT A/B jacks to the amps
in multirooms A and B. Or, you can also connect
the MULTI SPK (LEFT/RIGHT) terminals to the
speakers in multirooms A and B.
The SR9600 supports some Multiroom system
f e a t u r e s s u c h a s s o u r c e s e l e c t o r , O S D
information, sleep timer, Multiroom Speaker output
and remote control.
The multiroom feature of the SR9600 allows use in
two rooms, A and B, however the Multispeaker
mode can be used in only one of the two rooms.
MULTIROOM PLAYBACK USING THE
MULTI ROOM OUT TERMINALS
The SR9600's MULTI ROOM A/B output terminals
include audio pre-out terminals for which the
volume is adjustable and composite video output
terminals.
A stereo power amplifier (sold separately) can be
connected to enjoy multi room playback.
2.
1. 1.
AV SURROUND RECEIVER SR9600
AV SURROUND RECEIVER SR9600
INPUT SELECTOR
INPUT SELECTOR
PURE DIRECT
PURE DIRECT
THX
THX
DOWN
DOWN
TUNING
TUNING
UP
UP
SURROUND
SURROUND
MULTI
MULTI
MODE
MODE
AUTO
AUTO
MULTI
MULTI
SPEAKER
SPEAKER
AUTO TUNE
AUTO TUNE
T-MODE
T-MODE
MEMORY
MEMORY
7.1CH INPUT
7.1CH INPUT
DISPLAY
DISPLAY
PURE DIRECT
PURE DIRECT
THX
THX
MRAC
MRAC
STANDBY
STANDBY
ENTER
ENTER
MENU
MENU
EXIT
EXIT
POWER ON/STANDBY
POWER ON/STANDBY
PHONES
PHONES
MIC
MIC
SR9600U DFU̲01̲ENG 4̲4
Page 61
All manuals and user guides at all-guides.com
OPERATION TO MULTI ROOM OUT WITHOUT THE
REMOTE CONTROLLER.
1.
Press the MULTI button. A menu appears for
setting the source and volume for rooms A
and B. Select a room with the
buttons. The "MULTI" indicator flashes for
approx. 10 seconds.
2.
Select the input source using the INPUT
SERECTOR knob.
3.
Set the volume level in the multiroom as
desired.
This will only set the volume in the MULTI A or
B rooms.
4.
Press the SLEEP button to set the sleep timer
for the selected room.
Note:
• Settings can be performed from the MAIN MENU
as well. (See page 44)
MULTIROOM OPERATION FROM THE REMOTE
CONTROL UNIT
wed Jun 01
4:40
pm
1/6
Multi room A
MULTI-ROOM A
2.
2.
1.
Tap either the Multi room A or Multi room B
button on the Home screen.
2.
Tap the Power on button on page 1/6. The
"MULTI A" or "MULTI B" appears on the
display. Set the volume with the Volume + and
–.
3.
Press the page up button until page 2/6
appears. Select the input source.
Notes:
VOLUME
VOLUME
• For more information about the Multi room A (or
Multi room B) screens (pages 1/6-6/6), see page
DOWN
DOWN
UP
BAND
BAND
F/P
F/P
13.
• When only Multiroom A is on, "MULTI A"
CLEAR
CLEAR
SPEAKERS
SPEAKERS
appears on the display. When only Multiroom B is
A/B
A/B
AUX 1 INPUT
AUX 1 INPUT
DIGITAL
DIGITAL
S-VIDEO
S-VIDEO
VIDEO
VIDEO
L
AUDIO
R
on, "MULTI B" appears on the display. When
both Multirooms A and B are on, "MULTI A . B"
appears on the the display.
MULTI ROOM PLAYBACK USING
THE MULTI SPEAKER TERMINALS
The SR9600 allows you to connect another set of
speakers and place them in a different room or
or
cursor
separated area for listening to music.
OPERATION TO MULTI ROOM SPEAKER WITHOUT
THE REMOTE CONTROL UNIT.
2.
AV SURROUND RECEIVER SR9600
AV SURROUND RECEIVER SR9600
INPUT SELECTOR
INPUT SELECTOR
STANDBY
STANDBY
POWER ON/STANDBY
POWER ON/STANDBY
PHONES
PHONES
1.
Press the MULTI SPEAKER button. "SPKR A
wed Jun 01
4:40
DVD" is displayed and the "MULTI" indicator
pm
2/6
Multi room A
flashes for approx. 10 seconds.
MULTI-A : Source
To set the Multiroom Speaker mode to room
B, press the MULTI SPEAKER button again.
3.
2.
Select the input source using the INPUT
SELECTOR knob.
3.
Set the volume level in the multiroom as
desired.
This will only set the volume in the multiroom.
Note:
• The Multiroom Speaker mode can also be set
from the MAIN MENU. (See page 44)
Notes for Multi Room Speaker
• The Multiroom Speaker mode can be set for only
one of the rooms, A or B.
• The MULTI ROOM SPEAKER output terminals
can be used when Surround Back Speaker =
"NONE" in the SPEAKER SETUP menu. (See
SPEAKER SETUP, page 38)
• "The Surr. Back Speakers are in use" is
displayed when the MULTI SPEAKER button is
pressed when the Surround Back Speaker is not
set to "NONE" in the SPEAKER SETUP menu.
(See SPEAKER SETUP, page 38)
• The Multispeaker mode cannot be used at the
same time as the speaker C. When connecting for
multiroom use, set the SPEAKER C selector
switch on the rear panel to OFF.
05.4.27, 5:49 PM
MULTIROOM SPEAKER OPERATION FROM THE
REMOTE CONTROL UNIT
wed Jun 01
1/6
Multi room A
MULTI-ROOM A
1.
3.
VOLUME
VOLUME
DOWN
DOWN
UP
PURE DIRECT
PURE DIRECT
THX
THX
DOWN
DOWN
TUNING
TUNING
UP
UP
BAND
BAND
F/P
F/P
1.
Tap either the Multi room A or Multi room B
SURROUND
SURROUND
MULTI
MULTI
MODE
MODE
AUTO
AUTO
MULTI
MULTI
SPEAKER
SPEAKER
AUTO TUNE
AUTO TUNE
T-MODE
T-MODE
MEMORY
MEMORY
CLEAR
CLEAR
on the Home screen.
7.1CH INPUT
7.1CH INPUT
DISPLAY
DISPLAY
SPEAKERS
SPEAKERS
PURE DIRECT
PURE DIRECT
THX
THX
MRAC
MRAC
A/B
A/B
2.
ENTER
ENTER
MENU
MENU
EXIT
EXIT
Tap the Multi Spk on on page 1/6. The MULTI
AUX 1 INPUT
AUX 1 INPUT
DIGITAL
DIGITAL
S-VIDEO
S-VIDEO
VIDEO
VIDEO
L
AUDIO
R
MIC
MIC
A·SPK (MULTI B·SPK) screen appears on the
display. Set the volume with the Volume + and
–.
3.
Press the page up button until page 2/6
appears. Select an input source.
Note:
• When the Multispeaker mode is set to room A,
"MULTI A·SPK" appears on the display. When
the Multispeaker mode is set to room B, "MULTI
B·SPK" appears on the display.
Adobe PageMaker 6.5J/PPC
4:40
wed Jun 01
4:40
pm
pm
2/6
Multi room A
MULTI-A : Source
3.
2.
2.
61
Advertisement
Table of Contents
