Speaker installation/connection (Other than 7.1-channel system with surround back speakers)
This section explains a wide range of speaker installation/connection/setting procedures.
For details on installing/connecting/setting 7.1 channel audio that uses surround back speakers, see "Simple version (Simple setup guide)" (vpage 4).
Use the Audyssey ® Auto Setup function of this unit to automatically detect the number of connected speakers and perform optimal settings for the speakers to
be used.
Procedure for speaker settings
Install
Connect (vpage 36)
Set up speakers (vpage 39)
Install
This unit is compatible with Dolby Pro Logic gz (vpage 88),
which offers an even wider and deeper surround sensation.
When using Dolby Pro Logic gz, install front height speakers.
Install the surround back speakers in a position 60 to 90 cm higher
than ear level.
Surround
Front height
speaker
speaker
• Point slightly
downwards
At least
z
60 – 90 cm
1 m
Front
speaker
GViewed from the sideH
z Recommended for Dolby Pro Logic gz
NOTE
It is not possible to use the surround back speakers and front height