System Settings Parameters - Ricoh 1018 Operating Instructions Manual

Printer controller

Hide thumbs Also See for 1018:

Table of Contents

System Settings Parameters

This section contains the information about the parameters used for the printer.

Reference

For more information about the other parameters in the System Settings

menu, see the "System Settings" manual.

1.Function Priority

3.System Reset

6.Auto Off Timer

Description

You can specify the mode (Copier, Fax or Printer) to be displayed

immediately after the operation switch is turned on or System Re-

set mode is turned on.

Note

❒ Default: Copier

The machine returns to its prioritized mode automatically after

your job is finished, when you selected the time. This function is

called "System Reset". The time can be set from 10 to 999 seconds,

or no system reset.

Note

❒ Default: On (60 seconds)

❒ You can specify the prioritized mode with the user tools. See

"1.Function Priority".

The machine turns itself off automatically to conserve energy after

your job is finished, after the selected time. This function is called

"Auto Off ". The time can be set from 1 to 240 minutes.

Note

❒ Default: 30 minutes

❒ Auto Off might not be effective when an error message is dis-

played.

❒ To return to the ready condition from Auto Off, the machine

requires the same warm-up time as the time for becoming

ready after power is turned on.

❒ When the machine receives a fax or printer data in Auto Off

mode, it automatically prints the fax or the printer data.

Adjusting System Settings

Table of Contents