Reading Open Source Software Information - Siemens SIMATIC S7-1500 System Manual

3. The service data page will appear on your screen, with a button for saving the service data.
Figure 16-2
4. Save the service data locally on your PC/programming device, by clicking "Save ServiceData".
Result: The data is saved in a .dmp file with the following naming convention: "<Article
number> <Serial number> <Time stamp>.dmp". You can change the file name.
Note
If you have defined your user page as the Web server homepage, you cannot directly access
the service data by entering the IP address of the SIMATIC Drive Controller. For more
information on reading out service data via a user-defined page, refer to the Web server
(https://support.industry.siemens.com/cs/ww/en/view/59193560) function manual.
Procedure using STEP 7
A description of how to save service data is available under the keyword "Save service data" in
STEP 7 online help.
16.3

Reading Open Source Software information

Requirements for reading Open Source Software information
To read the Open Source Software information from a SIMATIC Drive Controller, you require
the following components:
• SD card reader
• Empty standard SD card (FAT32-formatted) or SIMATIC Memory Card; minimum size: 1 GB
• SIMATIC Drive Controller with hardware function version ≥ FS 11.
Procedure
To read Open Source Software information, proceed as follows:
1. Insert the memory card into the SD card reader of your PG/PC.
2. Create a folder "OSSINFO" (uppercase) in the main directory of the memory card.
3. Remove the memory card from the SD card reader.
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD
Saving service data via the Web server
Test and service functions
16.3 Reading Open Source Software information
347