Siemens SIMATIC S7-1500 System Manual page 308

SIMATIC memory card
14.1 SIMATIC memory card – Overview
Folder
SET_PWD.S7S
MCRC
OSSINFO
1) The content of these folders is also loaded to the TIA Portal project with "Upload device as new station".
Table 14- 2 File structure
File type
S7_JOB.S7S
SIMATIC.HMI\Backup\*.psb
SIMATICHMI_Backups_DMS.bin
__LOG__
crdinfo.bin
*.pdf, *.txt, *.csv, etc.
SET_PWD.S7S/PWD.TXT
Device_Info_OSS.zip
Note
Supported file/folder names and hierarchy levels on the SIMATIC Memory Card
The following rules apply to file names, folder names and hierarchy levels on the SIMATIC
Memory Card:
• Do not use any umlauts (ö, ä, ü, Ö, Ä, Ü) in file and/or folder names.
• Use a maximum of 60 characters for file and/or folder names.
• Use a maximum of 6 hierarchy levels for the folder structure of the SIMATIC Memory Card
(for example: /mountpoint/1/2/3/4/5/6/file.txt).
The operating system of the CPU supports folders of no more than 8 levels, where one
level is reserved for the root node and one for the actual file.
306
Description
Files for "SET PASSWORD" job
For more information, see Communication Function Manual
(https://support.industry.siemens.com/cs/ww/en/view/59192925), section Assign password via
SIMATIC Memory Card.
Motion Control Runtime Component: Motion control package for KinPlus
If there is a folder "OSSINFO" in the main directory of the memory card, the open source software
information will be copied to the memory card after the CPU is powered-on.
Description
Job file
Panel backup files
Protected file (required for use of panel backup files in STEP 7)
Protected system file (required for use of card)
Protected system file (required for use of card)
Additional file with different formats that you can also store in folders on the
SIMATIC Memory Card
If you store the files in the "UserFiles" folder, the files are stored in the STEP 7 project
with "Upload device as new station" and can be used, for example, for restoring files
in the event of a defective SIMATIC Memory Card.
Files for protecting confidential PLC configuration data
For more information, see Communication Function Manual
(https://support.industry.siemens.com/cs/ww/en/view/59192925), section Assign
password via SIMATIC Memory Card.
The archive file contains Open Source Software information read from the CPU.
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD