Siemens SIMATIC S7-1500 System Manual page 207

Procedure
1. Open the device view of the CPU.
2. Configure the operating modes of the technology I/Os in the CPU properties under "General"
> "DI/DQ 8x24VDC[X142]" > "Channel parameters", for example, a timer DQ for later use as a
cam output for channel 3.
Figure 9-39 Setting the operating mode for technology I/O X142
3. In the project tree under the axis technology object, add an output cam technology object
under "Output cam" > "Add new output cam".
4. Open the configuration of the output cam.
5. Under "Hardware interface", select the "Activate output" checkbox and the option "Output
over Timer DQ".
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD
Configuring
9.11 Configuring the clock system
205