TKP-4 / WKP-4 Connection
Figure 2.4
Figure 2.5
You can use either type of standard intercom cable as shown in Figure 2.2 or Figure 2.3.
Alternatively, you can connect directly to the terminal block as shown in Figure 2.4. In either
case, use tie wraps to secure the wires as shown in Figure 2.5.
Power Connection
MKP-4, MKP-12, and BKP-4: Plug an power cord (not supplied) into the power connector and
into any 90-240 VAC, 47-63 Hz main power source.
TKP-4 / WKP-4: Connect an optional AC adapter using the color-code information on the AC
adapter and the terminal pinout information in Figure 2.4. Alternatively, connect any well
regulated and filtered 15 VDC, 1 amp power source to the power terminals.
2-10
U s e r I n s t r u c t i o n s M K P - 4 , B K P - 4 , W K P - 4 , T K P - 4 , a n d M K P 1 2 K e y p a n e l s
Intercom and Power Terminal Block Pinouts for the TKP-4 / WKP-4.
Use tie wraps to secure the cables (WKP-4 installation).