Configurable Code Lengths - Honeywell MetroSelect Eclipse MS 5145 Configuration Manual

³ 9 0 1 8
³ 9 0 1 9
³ 1 1 9 4
³ 1 1 9 4
³ 1 0 0 7
³ 1 0 0 7

Configurable Code Lengths

There are seven bar code lock lengths available. Specific code types can be
assigned to a lock length.
While in configuration mode:
1. Scan the code length lock #1 bar code (below).
2. Scan the three code bytes that represent the code length
(on page 16–1).
3. Scan the matching code type lock #1 bar code (below).
4. Scan the three code bytes that represent the code type (on page 16–1).
This process can be repeated for lock lengths 2 through 7.
³ 9 0 2 0
³ 9 0 2 1
~ Minimum Symbol Length – Single-line default
is 3. Combine this code with the proper code bytes
0 0
(on page 16–1), to specify the minimum number
of characters in all non-UPC/EAN bar codes.
~ Symbol Length Lock – Combine this code with
the proper code bytes, to lock the bar code's
0 0
length into place.
Enable Modulus 8 Filter on Bar & Space
Counts
1 7
* Disable Modulus 8 Filter on Bar & Space
Counts
0 7
Handle Code 39 Bad Border
1 2
* Disable Code 39 Bad Border
0 2
~ Code Length Lock #1
0 0
~ Code Type Lock #1
0 0
2–9