Honeywell MetroSelect Eclipse MS 5145 Configuration Manual page 81

³ 3 1 6 4
³ 3 1 6 4
³ 1 1 7 8
³ 1 1 7 8
³ 1 1 9 8
³ 1 1 9 8
³ 9 9 9 9
³ 9 9 9 9
³ 9 9 9 9
³ 9 9 9 9
³ 1 1 7 8
³ 1 1 7 8
15–2
Enable Uni-Directional USB Serial Emulation
Mode –Supported in Honeywell MS9500,
7 0
MS5100 and IS4125 laser-class products.
Note: This bar code enables Bi-Directional USB
Enable Bi-Directional USB Serial Emulation
Mode – Supported in Honeywell MS9500,
6 0
MS5100 and IS4125 laser-class products.
Note: This configuration code is not supported for
Enable Bar Code ID
1 7
Disable Bar Code ID
0 7
Enable USB Reserve Code #1
1 7
Disable USB Reserve Code #1
0 7
Enable USB Reserve Code #2
7 3
Disable USB Reserve Code #2
7 2
Sears USB Defaults
6 7
Sears Aux Defaults
6 6
Enable IBM 1520 Code Flag Emulation –
UPC code IDs and ITF code IDs remain the
1 3
same but all other code IDs are transmitted as
Code 39 (IBM OEM Scanner Modes).
Disable IBM 1520 Code Flag Emulation
0 3
Serial Emulation Mode in the Honeywell
®
Focus area-imaging products.
Focus/Imager class products (see note
above).