Honeywell MetroSelect Eclipse MS 5145 Configuration Manual page 99

³ 9 9 8 0
³ 1 2 5 6
³ 1 2 5 6
³ 9 9 8 0
³ 9 9 8 0
³ 9 9 8 0
³ 1 2 3 9
³ 1 2 3 9
20–2
Clear Inventory Records – Will clear all stored
bar code data in memory.
4 9
Enable Auto Clear Records – Will automatically
clear the stored records in the inventory buffer
1 2
after transmission of the records stored.
* Maintain Records
0 2
Delete Last Record – Deletes the last bar code
stored.. When the Transmit Quantity Field has
4 8
been enabled, each scanned quantity code is a
unique field. If the delete last record bar code is
scanned, it will remove the last quantity code
scanned.
Example:
If a quantity of 103 (Quantity 1, Quantity 0,
and Quantity 3) was scanned but a quantity
of 10 was desired.
1.
2.
Transmit All Records – Transmits all stored data
records.
5 0
Transmit Record Counters – Will transmit the
number of records and the number of bar codes
5 1
currently stored as a 5-digit number separated by
a space.
Transmit Quantity Field – Adds an additional
quantity field for the last item (bar code) scanned.
1 5
Once enabled the user is able to enter a numerical
quantity from 1 to 9999 for the last item (bar code)
scanned (see Inventory Quantity Bar Codes,
on page 20–3).
* Don't Transmit Quantity Field
0 5
Scan the delete last record bar code.
The Quantity 3 code will be deleted and
a quantity of 10 will be stored.