Honeywell MetroSelect Eclipse MS 5145 Configuration Manual page 95

³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
³ 1 1 5 0
For Same Symbol Time Out information refer to page 7–3.
18–2
Disable GS1 DataBar 2D Linkage
1 7
Enable UPC/EAN Linkage – Link UPC/EAN
symbols with a 2D composite constituent then
1 6
transmit.
* Disable UPC/EAN Linkage
0 6
* Enable Code 128 Linkage – Transmit the 1D
Code 128 without scanning the 2D portion.
0 5
Disable Code 128 Linkage
1 5
* Enable PDF 1D Linkage – Transmit the 2D
portion of the PDF-417 without scanning the 1D
0 4
portion.
Disable PDF 1D Linkage
1 4
* Enable UPDF 1D Linkage – Transmit the 2D
portion of microPDF without scanning the 1D
0 3
portion.
Disable UPDF 1D Linkage
1 3
* Normal Composite Xmit – Always transmit the
1D and 2D constituent composite components
0 2
separately.
Xmit Composite Separately – Transmit the
1D and 2D constituent composite components
1 2
separately.
Enable EAN-128 Emulation – Utilize the
UCC/EAN128 protocol for transmission
1 1
purposes.
* Disable EAN-128 Emulation
0 1