Maintenance; Recommended Maintenance; Schedule(S) - Toro Z Master Z597-D Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the rst 8 operating
hours
After the rst 25
operating hours
After the rst 50
operating hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 500 hours
Every 600 hours
Every 800 hours
Yearly
Every 2 years
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
Maintenance Procedure
• Check cooling system level.
• Check the hydraulic uid.
• Change the hydraulic lter and oil.
• Change the engine oil.
• Change the engine oil lter.
• Test the safety system.
• Check the engine oil.
• Check cooling system level.
• Clean the cooling system.
• Check the mower blades.
• Clean the mower deck.
• Grease the mower deck and spindles.
• Grease the mower belt idler arm.
• Grease the pump belt idler arm.
• Grease the drive belt idler arm.
• Grease the brake lever.
• Check the hydraulic uid.
• Check the tire pressure.
• Check the pump drive belt.
• Check the alternator belt.
• Change the engine oil.
• Check the cooling system hoses.
• Inspect the belts for cracks and wear.
• Check the hydraulic hoses.
• Lubricate the machine with light oil (Refer to Lubrication).
• Replace the primary air lter.
• Change the engine oil lter.
• Grease the brake pivot.
• Check the wheel hub slotted nut.
• Adjust the caster pivot bearing.
• Replace the fan hydraulic lter.
• Replace the safety air lter.
• Replace the fuel lter.
• Grease the front caster pivots (more often in dirty or dusty conditions).
• Change the hydraulic lter and oil.
• Change the engine coolant.
35