Navigating Back To Start; Stopping Navigation; Editing Locations; Deleting A Location - Garmin EDGE EXPLORE 2 Owner's Manual

Navigating Back to Start

At any point during your ride, you can return to the starting point.
1 Go for a ride.
2 At any time, swipe down from the top of the screen, and on the controls widget, select Back to Start.
3 Select Along Same Route or Most Direct Route.
4 Select Ride.
The device navigates you back to the starting point of your ride.

Stopping Navigation

1 Scroll to the map.
2 Tap the screen.
3 Select Stop Navigation >

Editing Locations

1 Select Navigation > Saved Locations.
2 Select a location.
3 Select the information bar at the top of the screen.
4 Select .
5 Select an attribute.
For example, select Change Elevation to enter a known altitude for the location.
6 Enter the new information, and select

Deleting a Location

1 Select Navigation > Saved Locations.
2 Select a location.
3 Select the location information at the top of the screen.
4 Select > Delete Location >

Courses

You can send a course from your Garmin Connect
can navigate the course on your device. You can also create and save a custom course directly on your device.
You can follow a saved course simply because it is a good route. For example, you can save and follow a bike-
friendly commute to work.
TIP: You can send courses to your device from third-party apps when you link your accounts or use a Connect
IQ app. Go to apps.garmin.com
10
.
.
.
account to your device. After it is saved to your device, you
™
for more information about Connect IQ apps.
Navigation