Device Care; Cleaning The Device; Edge Power Mount Device Care; Cleaning The Edge Power Mount - Garmin EDGE EXPLORE 2 Owner's Manual

Hide thumbs Also See for EDGE EXPLORE 2:
Table of Contents

Advertisement

Device Care

Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
Never use a hard or sharp object to operate the touchscreen, or damage may result.
Avoid chemical cleaners, solvents, sunscreen, and insect repellents that can damage plastic components and
finishes.
Secure the weather cap tightly to prevent damage to the USB port.
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.

Cleaning the Device

Even small amounts of sweat or moisture can cause corrosion of the electrical contacts when connected to a
charger. Corrosion can prevent charging and data transfer.
1 Wipe the device using a cloth dampened with a mild detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.

Edge Power Mount Device Care

Secure the weather cap tightly to prevent damage to the exposed contacts.
Keep the components clean and free of debris.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
Avoid chemical cleaners, solvents, sunscreen, and insect repellents that can damage plastic components and
finishes.
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Replace components with Garmin parts only. See your Garmin dealer or the Garmin website.
Contact your local waste disposal department to dispose of the power mount in accordance with applicable
local laws and regulations.

Cleaning the Edge Power Mount

• Clear mud and dirt from the weather cap area and exposed contacts.
• While the weather cap is installed, hold the device under running water.
After cleaning, allow the device to dry completely.

Resetting the Device

If the device stops responding, you may need to reset it. This does not erase any of your data or settings.
Hold
for 10 seconds.
The device resets and turns on.

Restoring the Default Settings

You can restore the default configuration settings and activity profiles. This will not remove your history or
activity data, such as rides and courses.
Select
> System > Device Reset > Reset Default Settings >
50
NOTICE
NOTICE
NOTICE

Troubleshooting

.
Troubleshooting

Advertisement

Table of Contents
loading

Table of Contents