RJ45 OCP mezzanine cards
Installing the RJ45 OCP mezzanine card
To install the RJ45OCP mezzanine card:
Remove the compute node (on page 21).
1.
Remove the riser board (on page 42).
2.
Remove the screw securing the bracket blank to the chassis.
3.
Align the marks on the mezzanine card with the pins on the system board.
4.
Secure the mezzanine card to the system board with the screws.
5.
Install the riser board (on page 43).
6.
Install the compute node (on page 22).
7.
Hardware options installation 49