Installing The System Board - HP Cloudline CL5200 Gen9 User And Maintenance Manual

Installing the system board

To install the system board:
Align the I/O ports on the system board with the slots on the rear of the chassis.
1.
Lower and slide the system board into the chassis.
2.
Install and secure the screws to the system board.
3.
Connect the cabling to the system board.
4.
Install the mezzanine card (on page
5.
Install the riser board (on page 43).
6.
Install the processors (on page 39).
7.
Install the heat sinks (on page 37).
8.
Install the memory modules (on page 41).
9.
Install the air baffle (on page 35).
10.
Install the compute node (on page 22).
11.
47 or page 49).
Hardware options installation 56