Table of Contents
Advertisement
The following illustration shows the locations of parts on the system board.
connector (some models)
Installing memory
Your computer has four connectors for installing dual inline memory modules
(DIMMs) that provide up to a maximum of 4.0 GB of system memory.
When installing DDR2 type memory modules, the following rules apply:
v Use 1.8 V, 240-pin double data rate 2 synchronous dynamic random access
v Use 256 MB, 512 MB or 1.0 GB memory modules in any combination.
To install a memory module:
1. Removing the cover. See "Removing the cover" on page 10.
12
User Guide
1 Speaker connector
2 Memory connector 4
3 Memory connector 3
4 Memory connector 2
5 Memory connector 1
6 Front panel I/O connector
7 Power supply connector
8 PATA IDE connector
9 System fan connector
10 SATA connectors
11 PCI Express (x16) graphics adapter
memory (DDR2 SDRAM).
12 PCI adapter connector 1
13 PCI adapter connector 2
14 Serial connector
15 PCI Express (x1) adapter connector
16 Clear CMOS/Recovery jumper
17 Battery
18 Microprocessor fan connector
19 Microprocessor
20 Microprocessor heat sink
21 12v power connector
22 Diskette drive connector
Advertisement
Table of Contents
