Table of Contents
Advertisement
8. Install the drive into the bay until it snaps into position or for the adapter
bracket, install the screws that secure the bracket in the bay.
9. A hard disk drive requires two cables; a power cable that connects to the power
supply and a signal cable that connects to the system board.
v A parallel ATA hard disk drive requires a four-wire power cable.
v A serial ATA hard disk drive requires a five-wire power cable.
The steps to connect a drive are different depending on the type of drive you are
connecting. Use one of the following procedure for your drive connection.
Chapter 1. Installing options
19
Advertisement
Table of Contents
