Safety; Safety And Instructional Decals - Toro Greensmaster 04251 Owner's Manual

Safety

Hazard control and accident prevention are
dependent upon the awareness, concern, and
proper training of the personnel involved in the
operation, transport, maintenance, and storage of
the machine. Improper use or maintenance of the
machine can result in injury or death. To reduce
the potential for injury or death, comply with the
following safety instructions.
•
Read, understand, and follow all instructions in the
traction unit and cutting unit operator's manuals
before operating the cutting unit.
•
Keep children out of the operating area. Never
allow children to operate the machine.
•
Never operate the cutting units while ill, tired, or
under the influence of drugs or alcohol.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.
•
Wear appropriate clothing, including eye
protection, slip resistant, substantial footwear, and

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Warning—read the
instructions before
servicing or performing
maintenance.
1. Warning—stay away from moving parts, keep all guards
and shields in place.
104–7729
2. Cutting/dismemberment
hazard; hand or foot—stop
the engine and wait for
moving parts to stop.
120-9570
hearing protection. Tie back long hair and do not
wear jewelry.
•
Remove all debris or other objects that the
cutting-unit blades might pick up and throw. Keep
all bystanders away from the working area.
•
If the cutting blades strike a solid object or the unit
vibrates abnormally, stop and shut off the engine.
Check the cutting unit for damaged parts. Repair
any damage before starting the cutting unit.
•
Keep all nuts, bolts, and screws tight to be sure
the equipment is in safe working condition.
•
Remove the key from ignition switch to prevent
accidental starting of the engine when servicing,
adjusting, or storing the machine.
•
If major repairs are ever needed or if assistance is
desired, contact an authorized Toro distributor.
•
To ensure optimum performance and continued
safety certification of the machine, use only
genuine Toro replacement parts and accessories.
Replacement parts and accessories made by
other manufacturers could be dangerous, and
such use could void the product warranty.
decal104-7729
1. Cutting unit clip chart
decal120-9570
3
131-1820
decal131-1820