Table of Contents
Advertisement
3.8
Firing rate
The burner can work in two ways: low and high fire.
MAXIMUM OUTPUT must be selected in area A.
MINIMUM OUTPUT must not be lower than the minimum limit
shown in the diagram:
Model
RLS 38/E
RLS 50/E
20027066
Technical description of the burner
MBtu/hr
GPH
434
3.1
546
3.9
The firing rate area values have been obtained con-
sidering an ambient temperature of 68 °F (20 °C),
and an atmospheric pressure of 394" WC and with
WARNING
the combustion head adjusted as shown on
page 26.
NOTE:
the firing rate areas given in Fig. 4 have been reduced by 10% with
respect to the maximum range that can be reached.
Tab. G
Consult procedure below to refer burner operating condition in high
altitude plants.
10
GB
20110622
Fig. 4
Advertisement
Table of Contents
