Rear Panel; Led Indicators - TRENDnet TEG-S28TX User Manual

Rear Panel

The rear panel of the Switch consists of an AC power connector. The
following shows the rear panel of the Switch.
Figure 3-2. Rear panel of the 10-port 10/100/1000Mbps Gigabit
AC Power Connector This is a three-pronged connector that
supports the power cord. Plug in the female connector of the
provided power cord into this connector, and the male
connector into a power outlet. Supported input voltages range
from 100 ~ 240 VAC at 50 ~ 60 Hz.
On/Off Switch This is the power on/off switch. After the power
cord is connected, push " - " to power on the Switch and push
" o " to power it off.

LED Indicators

The LED indicators of the Switch include Power, SPEED, LINK/ACT
and FDX/COL. The following shows the LED indicators for the Switch
along with an explanation of each indicator.
Ethernet Switch
11