Rear Panel - TRENDnet TEG-2248WS User Manual

52-port gigabit web-based smart switch

Hide thumbs Also See for TEG-2248WS:

Table of Contents

mini-GBIC Ports (Port 51~52):

The Switch is equipped with two mini-GBIC ports, supported optional

1000BASE-SX/LX mini-GBIC module.

Note: When the port was set to "Forced Mode", the Auto MDI/MDIX will be disabled.

Reset:

The Reset button is to reset all the setting back to the factory

default.

Note: Be sure that you recorded the setting of your device, else all the setting will be

erased when pressing the "Reset" button.

Rear Panel

Figure 4. Rear panel of the Switch

AC Power Connector:

This is a three-pronged connector that supports the power cord. Plug

in the female connector of the provided power cord into this connector,

and the male into a power outlet. Supported input voltages range from

100-240V AC at 50-60Hz.

Table of Contents