Rear Panel - TRENDnet TE100-S810Fi User Manual
8-port 10/100 mbps layer 2 masnaged switch with 100base-fx port
Hide thumbs
Also See for TE100-S810Fi:
- Specifications (3 pages) ,
- Quick installation manual (9 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
LED Status Color
Power
On
On
100M
Off
On
LNK /
Blinks Green
ACT
Off
On
FDX /
Blinks Orange
COL
Off
Table 2-1. The description of LED Indicator
Rear Panel
The Console port and 3-pronged power plug are located at the Rear
Panel of the TE100-S810Fi as shown in Figure 2-8. The Switches will
work with AC in the range 100-240V AC, 50-60Hz.
Figure 2-7 The Rear Panel of the TE100-S810Fi
Description
Green
Power On
The port is operating at the speed of
Green
100Mbps.
In 10Mbps mode or no device attached
The port is successfully connecting
Green
with the device.
The port is receiving or transmitting
data.
No device attached.
The port is operating in Full-duplex
Orange
mode.
Collision of Packets occurs in the port.
Half-duplex mode or no device
attached.
9
Advertisement
Table of Contents
