Table of Contents Table of Contents English ...................... 1. Before You Start ................. 2. How to Connect ................. 3. Using the Switch ................Troubleshooting ..................Version 10.31.05...
1. Before You Start Package Content TEG- 2400i/TEG- 2600i Quick Installation Guide User’s Guide CD-ROM AC power cord RS-232 cable Rack Mount Kit Application TEG-S2400i/TEG-S2600i Multi-mode Mini GBIC Module (TEG-MGBSX) Workstations with Fast Ethernet Card (TE100-PCIWN) Server with 1000Mbps Copper Gigabit PCI Adapter...
2. How to Connect 1. Connect the AC Power cord to the back of the TEG-S2400i/TEG-S2600i. 2. Connect the network cable to the front of the switch and your PC. 3. Verify that the PWR led displays a solid green light.
3. Using the Switch 1. Go to Start > Settings > Control Panel. 2. Double-Click the Network Connection Icon. 3. Right-Click Local Area Connection, and select Properties. English...
Page 6
4. Click the General tab, select Internet Protocol(TCP/IP), and click Properties. Change the IP address to 192.168.223.10 and click OK to apply the settings. 5. Open your web browser, type http://192.168.223.100, and press Enter. 6. User Name: admin Password: 123 7.
I do? You either have a faulty network card or a faulty network patch cable. Make sure that your network card and network cable are functional. If you have any questions regarding your switch please contact TRENDnet Technical Support Department. Certifications This equipment has been tested and found to comply with FCC and CE Rules.