Connecting Network Cable; Power On - TRENDnet TEG-S28TX User Manual

10-port 10/100/1000mbps nway gigabit ethernet switch

Hide thumbs Also See for TEG-S28TX:

Table of Contents

Connecting Network Cable

The Gigabit Ethernet Switch supports two 10/100/1000Mbps Gigabit

Ethernet ports and eight 10/100Mbps Fast Ethernet ports. Port 1 to

port 8 supports 10Mbps Ethernet or 100Mbps Fast Ethernet. Port 9 and

port 10 are Gigabit Ethernet ports and they support 10Mbps, 100Mbps

and 1000Mbps. All ports support half duplex or full duplex.

All ports are Auto-MDI type port, they auto-senses the incoming

connection type and switches between MDI-II and MDI-X. You can

make the connection using either a straight-through or crossover

cable.

The 10-port 10/100/1000Mbps Gigabit Ethernet Switch can be used

with AC power sources 100 - 240 VAC, 50 - 60 Hz. The Switch's power

supply will adjust to the local power source automatically and may be

turned on without having any or all LAN segment cables connected.

Table of Contents