When the system maintenance switch position 6 is set to the On position, the
system is prepared to erase all system configuration settings from both CMOS
and NVRAM.
For information on emergency ROM backup recovery, refer to ROMPaq disaster
recovery (on page 99).
System board LEDs
Item
1
2
3
4
CAUTION: Clearing CMOS and/or NVRAM deletes configuration
information. Be sure to properly configure the server or data loss could
occur.
LED description
PPM error
DIMM 4 failure
DIMM 3 failure
DIMM 2 failure
Server component identification
Status
Off = Normal
Amber = PPM failed or missing
Off = Normal
Amber = DIMM 4 has failed or is missing
Off = Normal
Amber = DIMM 3 has failed or is missing
Off = Normal
Amber = DIMM 2 has failed or is missing
13