Rear Panel
16-port 10/100Mbps NWay Fast Ethernet Switch Rear Panel
DC Power Jack: Power is supplied through an
external AC power adapter.
Check the technical
specification section for information about the AC
power input voltage.
Since the switch does not include a power switch,
plugging its power adapter into a power outlet will
immediately power on the device.
MDI-X Jacks: Use these jacks to connect
workstations to the Switch. These are MDI-X
(Medium-Dependent Interface, Cross-wired) jacks;
you can use ordinary straight-through twisted-pair
cables to connect network computers and network
9