the MDI-X port of the other switch (switch B) or other
device.
1. The Link/ACT LED indicator lights green for
connecting to 100Mbps speed. The LED lights
amber for connecting to 10Mbps speed.
2. The FDX/COL LED indicator lights green for
full-duplex connection. The LED remains off
for half-duplex connection.
Port Speed & Duplex Mode
After plugging the cable to a specific port, the system
uses auto-negotiation to determine the transmission
mode:
If the attached device does not support auto-
negotiation or has auto-negotiation disabled, an
auto-sensing process is initiated to select the proper
connection speed and the duplex -mode is set to half-
duplex.
15