10Base-T Hub; 100Base-Tx Hub; Hub Without Uplink (Mdi-Ii) Port - TRENDnet TE100-S16EPlus User Manual

uplink (MDI-II) port to any of the Switch's MDI-X
ports (1X ~ 16X) or from the hub's MDI-X port to
Switch's Uplink port (MDI-II).
A. 10BASE-T Hub
When connecting the Switch to a 10BASE-T hub, the
Switch's port LED indicators should light up as the
following:
FDX/COL LED indicator is OFF.
Link/ACT LED indicator is light amber.
B. 100BASE-TX Hub
When connecting the Switch to a 100BASE-TX hub,
the Switch's port LED indicators should light up as the
following:
FDX/COL LED indicator is OFF.
Link/ACT LED indicator is light green.

Hub without Uplink (MDI-II) port

If a hub is not equipped with an uplink (MDI-II) port,
the connection can be made using either straight cable
13