Uf20.241 Buffer Module - Pulse DIMENSION CP Series Manual

CP-Series
22.5. UF20.241 B
UFFER
The UF20.241 buffer module is a supplementary device for DC 24V power supplies. It delivers power to bridge
typical mains failures or extends the hold-up time after the AC power is turned off.
When the power supply provides a sufficient voltage, the buffer module stores energy in the integrated
electrolytic capacitors. When the mains voltage is lost, the stored energy is released to the DC-bus in a
regulated process.
The buffer module can be added in parallel to the load circuit at any given point and does not require any
control wiring.
One buffer module can deliver 20A additional current and can be added in parallel to increase the output
ampacity or the hold-up time.
Jul. 2022 / Rev. 1.2 DS-CP5.241-EN All parameters are typical values specified at 230Vac, 50Hz input voltage, 24V, 5A output load,
25°C ambient and after a 5 minutes run-in time unless otherwise noted.
M
ODULE
www.pulspower.com Phone +49 89 9278 0 Germany
CP5.241, CP5.241-C1, CP5.241-S1,
CP5.241-S2, CP5.242
24V, 5A, 120W, S P I
INGLE HASE NPUT
24/30