Environment - Pulse DIMENSION CP Series Manual

CP-Series
16. E
NVIRONMENT
Operational temperature
Storage temperature
Output derating
Humidity
Atmospheric pressure
Altitude
Over-voltage category
Degree of pollution
Vibration sinusoidal
Shock
Audible noise
Fig. 16-1 Output current vs. ambient temp.
(Inom 5A; Iout with PowerBoost = 6A)
Allowed Output C urrent at 24V
6A
5A
3.8A
A... 85 to 264Vac, continuous
B ... s hort term
0
-25 0
Jul. 2022 / Rev. 1.2 DS-CP5.241-EN All parameters are typical values specified at 230Vac, 50Hz input voltage, 24V, 5A output load,
25°C ambient and after a 5 minutes run-in time unless otherwise noted.
-25°C to +70°C
-40°C to +85°C
3W/K
0.33A/1000m or 5K/1000m
The derating is not hardware controlled. The user has to take this into consideration to stay below the
derated current limits in order not to overload the unit.
5 to 95% r.h.
110-54kPa
Up to 5000m
III
II
2
2-17.8Hz: ±1.6mm;
17.8-500Hz: 2g
2 hours / axis
30g 6ms, 20g 11ms
3 bumps per direction, 18 bumps in
total
Shock and vibration is tested in combination with DIN rails according to EN 60715 with a height of
15mm and a thickness of 1.3mm and standard orientation.
Some audible noise may be emitted from the power supply during no load, overload or short circuit.
B
A
45 60 70°C
Ambient Temperature
www.pulspower.com Phone +49 89 9278 0 Germany
CP5.241, CP5.241-C1, CP5.241-S1,
CP5.241-S2, CP5.242
24V, 5A, 120W, S
Operational temperature is the same as the ambient or
surrounding temperature and is defined as the air
temperature 2cm below the unit.
For storage and transportation
Between +60°C and +70°C
For altitudes >2000m, see Fig. 16-2
According to IEC 60068-2-30
See Fig. 16-2 for details
See Fig. 16-2 for details
According to IEC 60664-1 for altitudes up to 2000m
According to IEC 60664-1, for altitudes above 2000m
According to IEC 62477-1, not conductive
According to IEC 60068-2-6
According to IEC 60068-2-27
Fig. 16-2 Output current vs. altitude
*)
P I
INGLE HASE NPUT
16/30