Table of Contents
Advertisement
4. Clean the external glass panel and the
one you just removed. Use paper towels.
If there are tough to clean spots, use a
damp sponge and mild detergent.
5. Reinsert the glass panels in the reverse
order of removal.
6. Replace the inner glass panel. Make
sure you center and insert the four pins
into their grooves in the door, using a
little pressure.
3.4 Cleaning the inside the oven
The inside of the oven should be cleaned
regularly, after allowing it to cool.
Avoid leaving dried on food residues inside
the oven because it could damage the
enamel surface.
Before cleaning, take out all removable
parts.
Cleaning and Maintenance
To make cleaning easier, we recommend
that you remove:
• the door;
• the racks/tray supports;
• the seals.
If you use specific cleaning
products, we recommend running
the oven at maximum temperature
for 15-20 minutes in order to
eliminate any residues.
Removal of the rack/tray supports
Removing the guide frames makes it easier
to clean the sides of the oven. This must be
done each time you use the automatic
cleaning cycle (only on some models).
To remove the guide frames:
• Pull the frame towards the inside of the
oven to unhook it from its housing A, and
then slide it out of the grooves at the
back B.
• When you have finished cleaning the
oven, repeat the procedures indicated
above in reverse to replace the guide
frames.
35
Advertisement
Table of Contents
