Examples: Configuring Sdm Templates; Additional References For Sdm Templates; Feature History For Sdm Templates - Cisco Catalyst 9500 Manual

Examples: Configuring SDM Templates

Overflow L2 Multicast entries:
L3 Multicast entries:
Overflow L3 Multicast entries:
Ipv4/Ipv6 shared unicast routes:
Overflow shared unicast routes:
Policy Based Routing ACEs / NAT ACEs:
Tunnels:
LISP Instance Mapping Entries:
Control Plane Entries:
Input Netflow flows:
Output Netflow flows:
SGT/DGT (or) MPLS VPN entries:
SGT/DGT (or) MPLS VPN Overflow entries:
Wired clients:
MACSec SPD Entries:
MPLS L3 VPN VRF:
MPLS Labels:
MPLS L3 VPN Routes VRF Mode:
MPLS L3 VPN Routes Prefix Mode:
MVPN MDT Tunnels:
L2 VPN EOMPLS Attachment Circuit:
MAX VPLS Bridge Domains :
MAX VPLS Peers Per Bridge Domain:
MAX VPLS/VPWS Pseudowires :
Ipv4/Ipv6 Direct and Indirect unicast routes share same space
* values can be modified by sdm cli
Examples: Configuring SDM Templates
Device(config)# sdm prefer distribution
Device(config)# exit
Device# reload
Proceed with reload? [confirm]

Additional References for SDM Templates

Related Documents
Related Topic
For complete syntax and usage information for the commands used in
this chapter.

Feature History for SDM Templates

This table provides release and related information for features explained in this module.
These features are available on all releases subsequent to the one they were introduced in, unless noted
otherwise.
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
174
Configuring SDM Templates
2304
16384
768
114688
1536
3072
2816
1024
1024
49152
49152
32768
768
2048
256
1024
45056
112640
32768
1024
1024
1000
128
16384
Document Title
Command Reference (Catalyst
9500 Series Switches)