Monitoring And Troubleshooting The Feature - Cisco Catalyst 9500 Manual

Configuration Replace and Configuration Rollback

Monitoring and Troubleshooting the Feature

Perform this task to monitor and troubleshoot the Configuration Replace and Configuration Rollback feature.
Procedure
Step 1 enable
Use this command to enable privileged EXEC mode. Enter your password if prompted.
Example:
Device> enable
Device#
Step 2 show archive
Use this command to display information about the files saved in the Cisco IOS configuration archive.
Example:
Device# show archive
There are currently 1 archive configurations saved.
The next archive file will be named flash:myconfiguration-2
Archive #
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
The following is sample output from the show archive command after several archive files of the running
configuration have been saved. In this example, the maximum number of archive files to be saved is set to
three.
Example:
Device# show archive
There are currently 3 archive configurations saved.
The next archive file will be named flash:myconfiguration-8
Archive #
0
1
2
3
4
5
6
7
Name
flash:myconfiguration-1 <- Most Recent
Name
:Deleted
:Deleted
:Deleted
:Deleted
flash:myconfiguration-5
flash:myconfiguration-6
flash:myconfiguration-7 <- Most Recent
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
Monitoring and Troubleshooting the Feature
261