Asus Z9PE-D8 WS Manual page 57

8. Marvell Serial ATA 6.0 Gb/s connectors
®
(7-pin SATA6G_E1/E2/E3/E4 [gray])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
• For high performance of ASUS SSD Caching, please connect one HDD
and one SSD to Marvell
• For SSD Caching setup, you can use more than one SSD and only one
HDD.
• You cannot use ASUS SSD Caching and Marvell
• For regular usage, the SATA6G_E1/E2/E3/E4 connectors are
recommended for data drivers.
• You must install Windows
Serial ATA hard disk drives.
• Press <Ctrl> + <M> during POST to enter the Marvell
or delete a RAID configuration.
• If you want to install a Windows operating system to a RAID configuration
created using the Marvell
driver disk using the motherboard support DVD and load the driver during
OS installation. For 32/64bit Windows XP OS, load first the Marvell
shared library driver, and then load Marvell
®
Driver. For Windows Vista / Windows 7 OS, load only the Marvell
SATA Controller Driver.
ASUS Z9PE-D8 WS
SATA6G_E1/E2/E3/E4 connectors.
®
XP Service Pack 3 or later versions before using
®
SATA controller, you have to create a RAID
®
RAID at the same time.
®
RAID utility to create
®
92xx SATA Controller
®
®
92xx
2-35