Onboard Leds - Asus Z9PE-D8 WS Manual

2.7

Onboard LEDs

1. DIMM Error LED (ERR_DIMM)
These LEDs light up to indicate an error in its nearby DIMM.
Enabled only with ASMB6-i KVM on-board.
2. Baseboard Management Controller LED (BMC_LED1)
The BMC LED works with the ASUS ASMB6 management device and
indicates its initiation status. When the PSU is plugged and the system is
OFF, ASUS ASMB6 management device starts system initiation for about one
(1) minute. The BMC LED blinks after system initiation finishes.
ASUS Z9PE-D8 WS 2-21