Asus Z9PE-D8 WS Manual page 129

The ARRAY SELECTION MENU displays the available drives connected to
2.
the SATA ports. Use the up/down arrow keys to select the drives you want to
include in the RAID set, and then press <Space>. When selected, the drive
indicator changes from READY to ONLIN A[X]-[Y], where X is the array
number, and Y is the drive number.
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 2 DISK
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
• The information of the selected hard disk drive displays at the bottom of the
screen.
• You need at least two identical hard disk drives when creating a RAID 1 set.
• You need at least four identical hard disk drives when creating a RAID 10
set.
3. Select all the drives required for the RAID set, and then press <F10> to
configure array setting.
4. Press <Space> to select the configurable array.
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit
ASUS Z9PE-D8 WS
BIOS Version A.10.09231523R
Easy Configuration - ARRAY SELECTION MENU
PORT #
0 ONLIN A00-00
1
ONLIN A00-01
2
READY
READY
3
74.74GB HDS728080PLA380
BIOS Version A.10.09231523R
Easy Configuration - ARRAY SELECTION MENU
Select Configurable Array(s)
PORT #
A-0
0
DNLIN A00-00
SPAN-1
1
DNLIN A00-01
05.01C05
5-7