Asus Z9PE-D8 WS Manual page 174

When asked if you will load additional RAID controller drivers, select No, then
5.
press <Enter>.
Do you wish to load any more
driver disks?
6. Follow the onscreen instructions to finish the OS installation.
When the installation is completed, DO NOT click Reboot. Press <Ctrl>
7.
+ <Alt> + <F2> to switch to the command-line interface from graphic user
interface.
8. Type the following commands when using a Legacy floppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot
For Red Hat
To install the LSI MegaRAID controller driver when installing Red Hat
OS:
1. Boot the system from the Red Hat
2. Press <Tab> to edit options.
6-8
More Driver Disks?
Yes No
Enterprise Linux OS 6.1
®
OS installation CD.
®
Chapter 6: Driver installation
Enterprise
®