Asus Z9PE-D8 WS Manual page 133

Using New Configuration
When a RAID set already exists, using the New Configuration command
erases the existing RAID configuration data. If you do not want to delete the
existing RAID set, use the View/Add Configuration command to view or create
another RAID configuration.
To create a RAID set using the New Configuration option
From the Management Menu, select Configure > New Configuration, and
1.
then press <Enter>.
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Clear Existing Configuration And Start A New Configuration
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Follow step 2 to 9 of the previous section: Using Easy Configuration.
2.
Select Size from the Virtual Drive menu, and then press <Enter>.
3.
4. Key-in the desired virtual drive size, and then press <Enter>.
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
LD
Management Menu
0
Configure
Initialize
Objects
Rebuild
Check Consistency
Enter VD Size: 152146_
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Follow step 10 to 14 of the previous section: Using Easy Configuration to
5.
create the RAID set.
ASUS Z9PE-D8 WS
BIOS Version
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
BIOS Version
Virtual Drive(s) Configured
RAID Size #Stripes
Easy Configuration - ARRAY SELECTION MENU
1 148.580GB
PORT #
0
DNLIN A00-00
1
DNLIN A00-01
Virtual Drive 0
RAID = 1
Units= MB
Size = 152146MB
DWC = Off
RA = On
Accept
SPAN = NO
Enter VD Size:
A.10.09231523R
A.10.09231523R
StripSz Status
2 64 KB ONLINE
5-11